C C Generals 2 No Cd Crack
CLICK HERE > https://urlgoal.com/2ts4CQ
C&C Generals Zero Hour v1.04 NoCD patch by Iguana/Megatec~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~Date: 2005.05.02Notes:We Z:H addicts of Croatia waited and waited and waited but no crack for v1.04 appeared, none of the 2 existing mini images worked for meso I decided to do something about it. I have to thank iND for v1.03 patch without which this one probably wouldn't exist.Regards to all the generals out there! I salute you!Enjoy this excellent game!Install:1) copy to the safe place "generals.exe" & "game.dat" from your game dir (in case of more patches)2) copy "generals.exe" & "game.dat" from this archive to your game dir overwriting original files when prompted3) n-joy commanding your troopsSpecial greetings to the following generals: Cim - GLA toxin master, smelly ******* :) Crveni - the loverboy from capitol city =) Bimbo/PhoneLez - lay off the booze, stimulants aren't allowed :*) FoxxBL - The quick brown over-a-century old fox jumps over the lazy dog... :] Giovanni - Zhivio snoohshuy, ali zhivili Generalsi josh vishe! :) Shark - It's not the fight, it's the BITE... that counts! :] Emp(eror) - plochica po plochica, eto cijele bazice... :) Pingi - the man with the strongest right hand of them all :)And to all the other NEW guys in Z:H conflict: PatchKiller, Igi, Tantrum, Toma, Nemilostivi, BladeRunner... and all Croatian generals.Additional greetings to all "VT LAN Party" participants in VT/Croatia, all Megatec members, all the people I forgot and to YOU, general Sir. :)(Iguana/Megatec)
Fatigue crack delay behavior at high stress ratio caused by single peak overloads was investigated in two thicknesses of 7475-T731 aluminum alloy. Crack closure was measured in middle crack tension specimens with a crack-tip opening displacement gage located one-half of the specimen thickness behind the crack tip. Five overload ratios from 1.23 to 1.5 were investigated. The stress ratio was 0.7. Closure measurements indicated no closure occurred before or throughout the overload plastic zone following the overload. This was further substantiated by comparing the specimen compliance following the overload with the compliance of a low R ratio test when the crack was fully open. Scanning electron microscope studies revealed that crack tunneling and possibly reinitiation of the crack occurred, most likely a result of crack-tip blunting. The number of delay cycles was greater for the thinner mixed mode stress state specimen than for the thicker plane strain stress state specimen, which is similar to low R ratio test results and may be due to a larger plastic zone for the mixed mode case. 1e1e36bf2d